* 1/3" Progressive Scan CMOS sensor with 1.3 megapixel
   * H.264/MPEG4/MJPEG digital signal output with 15 FPS at 1280x1024 image size
   * H.264/MPEG4/MJPEG multi-stream output for simultaneous live monitoring and high resolution recording
   * 12VDC & PoE dual power
   * Power Over Ethernet (PoE) IEEE 802.3af
   * True Day/Night with ICR module
   * Built-in NeVio Express management software for viewing and recording at up to 16 cameras with pre-defined screen views and site address book
   * BNC test monitor output for the convenience of quick focus and diagnostics right at the camera site
   * Easy-to-use Smart Event Wizard for event, schedule and alarm recording to PC or SD card
   * Alarm triggers when motion is detected
   * Email notification or FTP video upload upon motion detection and/or alarm
   * Built-in SD memory card slot for local storage and support SDHC
   * Built-in digital motion detection feature
   * Two-way audio

• * Model Number - EAN900
• * Pickup Device - 1/3" Progressive Scan CMOS with 1.3 Megapixel
• * Pixel Effective - 1280 (H) x 1024 (V)
• * Sensitivity - 0.5 Lux / F=1.2
• * Day/Night - True Day/Night with IRC Module
• * Lens - Optional C/CS mount, manual/DD control supported
• * Video Output - BNC socket, composite 1.0Vp-p / 75 ohm
• * Video Compression - H.264/MPEG4/MJPEG
• * Video Resolution - 1280x1024 max.
• * Video Quality - 8 levels adjustable
• * Frame Rate - Up to 15 FPS at 1280x1024
• * Interface - 10Base-T/100Base-TX auto-negotiation, RJ-45 socket. Support MDI/MDI-X auto cross function.
• * Supported Protocols - HTTP, TCP / IP, UDP, RTP, RTSP, FTP, SMTP, DHCP, DNS, DDNS, NTP.
• * Bandwidth Control - Min. 64 kbps. adjustable
• * Max. Client Limit - 32 clients simultaneously
• * Alarm Input/Output - 1 / 1
• * RS-485 - RS-485 interface half-duplex
• * Microphone - Built-in
• * Operation Mode - Two-way audio
• * Event Trigger - Alarm Input, Manual Trigger, Motion Detection and Schedule Recording
• * Notification - Trigger alarm output, email notification, upload video to FTP, record video to SD card, record video to PC and network alarm
• * Pre/Post Alarm Buffer - 48MB RAM reserved for pre-alarm (record up to 120 sec.)
• * SD Card - SD card interface for local storage. Support SDHC
• * Power Supply - 12VDC & PoE
• * Power Over Ethernet - Yes (PoE 802.3af 48VDC)
• * Power Consumption - 4.5W max. (12VDC)
• * Weight - 550 g / 1.21 lbs
• * Dimension (L x W x H) - 136 x 68.5 x 56.5 mm / 5.35" x 2.72" x 2.22". 146 x 68.5 x 56.5 mm / 5.7" x 2.72" x 2.22" (w/BNC socket).
• * Operating Temp. - 0 - 40C / 32 - 104F
• * Humidity - < 90% not condensing