MPEG-4 ASP compression
CIF up to Full D1 resolution at 30/25 FPS
Multi-stream with variable frame rate in the same compression
Two way audio supported
Hardware motion detection, Digital Input / Output
Fail-over network protection and QoS enabled (L3) video streaming
Hybrid analog and ethernet video output
Optional rackmount kit available

• Model Number - SED-2140
• Video Compression - MPEG-4 ASP compliant compression
• Resolution - Full D1 (720 x 480 in NTSC, 720 x 576 in PAL), CIF (352 x 240 in NTSC, 352 x 288 in PAL), QCIF (160 x 112 in NTSC, 176 x 144 in PAL)
• Bit Rate - 28K-3M bps
• Image Frame Rate - 30fps at full D1 resolution (NTSC), 25fps at full D1 resolution (NTSC
• Multi-stream - Up to 4 configurable frame rate/bit rate streams for preview and recording
• Composite Input - CVBS, 1.0Vp-p with 75 Ù loading, BNC connector
• Composite Output - CVBS, 1.0Vp-p with 75 Ù loading, BNC connector
• Audio Input Compression - 8 kHz, Mono, PCM
• Audio Line Input - Unbalanced, 1.0 Vpp, 1 Vrms, 3.5 mm Jack
• Audio Output Compression - 8 kHz, Mono, PCM
• Audio Line Output - Unbalanced, 1.0 Vpp, 1 Vrms, 3.5 mm Jack
• Alarm Input - 2, TTL, terminal block.
• Alarm Output - 2, TTL, terminal block.
• Serial Port - RS-485: half duplex, terminal block. RS-422: full duplex, terminal block. RS-232: full duplex, terminal block.
• Reset Button - Factory default
• LED - System status
• LAN Port - Ethernet (10/100Base-T), RJ-45 connector
• WAN Port - Ethernet (10/100Base-T), RJ-45 connector
• Network Protocol - TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RSTP, FTP, SMTP.
• Web Browser - Microsoft Internet Explorer 6.0 or above
• SDK - ActiveX control, C SDK
• PTZ Protocol - Pelco-P_type1, Pelco-P_type2, Pelco-D, Dynacolor, Samsung, VCL, Videotrek, Kampro-V1, Kampro-V2.
• Security - Password protection: configured by the administrator
• Operating Temperature - 5 ~ 50C (40 ~ 122F)
• Power Requirement - DC 12V
• Power Consumption - 7.5 W
• Dimensions - 4.41" x 1.46" x 4.68"
• Weight - 350g (0.66lb)