|
Selectable MPEG-4 / MJPEG compression CIF up to Full D1 resolution at 30/25 FPS Multi-stream with variable frame rate in the same compression Two way audio supported Hardware motion detection Hybrid analog and ethernet video output Extended temperature supported Optional rackmount kit available
- Specifications:
- Model Number - ACD-2100T
- Compression - MPEG-4 SP, MJPEG selectable
- Resolution - Full D1 (720 x 480 in NTSC, 720 x 576 in PAL), CIF (352 x 240 in NTSC, 352 x 288 in PAL), QCIF (160 x 112 in NTSC, 176 x 144 in PAL)
- Bit Rate - 28 K ~ 3 M bps
- Image Frame Rate - 30 fps at full D1 resolution (NTSC), 25 fps at full D1 resolution (PAL)
- Multi-stream - Up to 2 configurable frame rate/bit rate for preview and recording
- Composite Input - CVBS, 1.0Vp-p with 75 Ù loading, BNC connector
- Composite Output - CVBS, 1.0Vp-p with 75 Ù loading, BNC connector
- Compression - 8 kHz, Mono, PCM
- Audio Line Input - Unbalanced, 1.4 Vp-p, 1 Vrms, 3.5 mm Jack
- Compression - 8 kHz, Mono, PCM
- Audio Line Output - Unbalanced, 1.4 Vp-p, 1 Vrms, 3.5 mm Jack
- Input - 2, TTL, terminal block
- Output - 2, TTL, terminal block
- Serial Port - RS-485: half duplex, terminal block, RS-422: full duplex, terminal block, RS-232: full duplex, terminal block
- Reset Button - Factory default
- LED - System status
- Ethernet - Ethernet(10/100 Base-T), RJ-45 connector
- Protocol - TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP
- Web Browser - Microsoft Internet Explorer 6.0 or above
- SDK - ActiveX control, C SDK
- PTZ Protocol* - Pelco-P_type1, Pelco-P_type2, Pelco-D, Dynacolor, Samsung, VCL, Videotrek, Kampro-V1, Kampro-V2
- Security - Password protection: configured by the administrator
- Temperature - -30 ~ 70C (-22 ~ 158F)
- Power Requirement - DC 12 V +-10%
- Power Consumption - 7.5 W
- Dimensions (WxHxD) - 4.41" x 1.46" x 4.68"
- Weight - 350 g (0.66 lb)
|